How To Prevent And Repair Brickwork That Has Been Damaged By Water

Continuous contact with water is often the most common reason why you'll see water damage to your brickwork. The problem with rainwater systems that aren't working is one most common reason that you'll see your walls continuously under assault by the elements. You can also hire experts by clicking on for the best brick repointing in Sydney.

Image Source: Google

If you find that you're experiencing damage to your brickwork, here are some suggestions to repair the issue if you're comfortable using a trowel.

The continual exposure to the moisture in the cement between your bricks causes it to become softer beginning from the exterior in. So the first step is to rake out the cement between your bricks, approximately 15mm deep, or until you are hitting the cement once more with care to not cause damage to the bricks.

The area of the surface should be cleaned when you've finished raking the soft cement. then using a clean, pointed trowel, you can fill the joints. Fill in the perpendicular horizontal or vertical joints initially and then fill in horizontal or bed joints. Finally, you can run the repair on top of the damaged area to blend it into the old brickwork.

If the brickwork is damaged by water, the damaged bricks need to be removed and replaced, with particular care to match the current brickwork. It is important to note at this point that the brick that is damaged on its showing side is often excellent on its other side.